All MIBs › A3COM-RIP-IPEXTNS-R4-MIB › a3RipIpIntPolCtl
a3RipIpIntPolCtl
Module: A3COM-RIP-IPEXTNS-R4-MIB
OID (symbolic): A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolCtl
OID (numeric): 1.3.6.1.4.1.43.2.8.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter determines which routes learned by an Interior Gateway Protocol (IGP) are reported by RIP-IP.
If this is set to all (1), all routes learned from an IGP are reported, provided those routes are allowed to be reported by the Network Policy (see a3RipIpNetPolCtl) The metric that will be reported by RIP for all routes learned via an IGP (other than RIP) is specified by a3RipIpIntPolAllMet.
If this is set to none (2), none of the routes learned from the IGP are reported.
If this is set to include (3) routes to destinations listed in a3RipIpIntPolTable are reported.
If this is set to exclude (4), all routes are reported except those listed in a3RipIpIntPolTable. If no routes are listed, no routes will be reported. The metric reported for routes learned via an IGP (other than RIP) in this case is calculated using the formula specified in a3RipIpImpMetTable (for ospf or iisis).
(note, in all these cases, Network Policy must be passed before this policy is applied).
If this objects gets changed from include to exclude, or from exclude to include, all existing entries will be flushed from the table.
What is a3RipIpIntPolCtl?
This OID controls which internal routes (from IGPs like OSPF) are re-advertised by RIP. Engineers set this to 'all' to redistribute learned routes, or 'selected' to filter specific protocols. Redistribution allows RIP nodes to learn about non-RIP routes discovered elsewhere in the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.8.2.1.9 snmpwalk -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolCtl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.8.2.1.9.1 snmpget -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolCtl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.8.2.1.9.1 i <value>
Start monitoring Legacy 3Com routers and L3 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolCtl OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers and L3 switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.8 | a3ComRipIp | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.2 | a3RipIpCtlTable | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.2.1 | a3RipIpCtlEntry | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.2.1.9 | a3RipIpIntPolCtl | A3COM-RIP-IPEXTNS-R4-MIB |