All MIBs › A3COM-RIP-IPEXTNS-R4-MIB › a3RipIpIntPolAddr

a3RipIpIntPolAddr

OID (symbolic): A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolAddr

OID (numeric): 1.3.6.1.4.1.43.2.8.4.1.2

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: This specifies a route destination learned via an IGP that is to be included or excluded (based on a3RipIpIntPolCtl) from RIP reports.

What is a3RipIpIntPolAddr?

This IP address identifies a specific interior route destination (learned via OSPF/ISIS) governed by this policy entry. Combined with port, it keys the policy table. Allows selective filtering of IGP-learned routes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.8.4.1.2
snmpwalk -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.8.4.1.2.1
snmpget -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolAddr.1

Start monitoring Legacy 3Com routers and L3 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolAddr OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers and L3 switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.43	a3Com	A3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2	brouterMIB	A3COM-BRIDGE-R3-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.43.2.8	a3ComRipIp	A3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.4	a3RipIpIntPolTable	A3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.4.1	a3RipIpIntPolEntry	A3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.4.1.2	a3RipIpIntPolAddr	A3COM-RIP-IPEXTNS-R4-MIB

A3COM-RIP-IPEXTNS-R4-MIB :: a3RipIpIntPolAddr

a3RipIpIntPolAddr

Module

This MIB depends on