Description: This parameter controls which routes learned by the Exterior Gateway Protocol (EGP) are reported by RIP-IP. If this is set to all (1), all routes learned from EGP or BGP are reported, provided those routes are allowed to be reported by the Network Policy (see a3RipIpNetPolCtl). The metric that will be reported by RIP for all routes learned via EGP or BGP is specified by a3RipIpExtPolAllMet.

If this is set to none (2), none of the routes learned from EGP or BGP are reported.

If this is set to include (3), routes to destinations listed in a3RipIpExtPolTable are reported. If no routes are listed in a3RipIpExtPolTable, all routes are reported. This applies to the other policy tables as well.

If this is set to exclude (4), all routes are reported except those listed in a3RipIpExtPolTable. If no routes are listed in a3RipIpExtPolTable, no routes are reported. This applies to the other policy tables as well. The metric reported for routes learned via EGP or BGP in this case is calculated using the formula specified in a3RipIpImpMetTable (for egp or bgp).

(note, in all these cases, Network Policy must be passed before this policy is applied).

If this objects gets changed from include to exclude, or from exclude to include, all existing entries will be flushed from the table.