All MIBs › A3COM-IPSO-R1-MIB › a3IPsecureMinLevel
a3IPsecureMinLevel
Module: A3COM-IPSO-R1-MIB
OID (symbolic): A3COM-IPSO-R1-MIB::a3IPsecureMinLevel
OID (numeric): 1.3.6.1.4.1.43.2.12.3.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This defines the minimum classification level which is acceptable by this port. This applies to any packet which is entering or leaving this port. If the classification level is outside the range defined by the value of this object and the value of a3IPsecureMaxLevel, the packet is discarded.
If a3IPsecureMaxLevel is set to level less than the level indicated by this object, the value of this object will be shifted so it is equal to a3IPsecureMaxLevel. This will ensure that the range of security levels identified by these two objects makes sense.
What is a3IPsecureMinLevel?
This integer sets the lowest acceptable security classification level for all packets entering or leaving the port; lower-classified packets are dropped. Engineers use this to enforce minimum security thresholds, rejecting insufficiently classified traffic. Setting it to 'Restricted' means packets classified as 'Unclassified' get discarded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.12.3.1.7 snmpwalk -v2c -c public <target> A3COM-IPSO-R1-MIB::a3IPsecureMinLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.12.3.1.7.1 snmpget -v2c -c public <target> A3COM-IPSO-R1-MIB::a3IPsecureMinLevel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.12.3.1.7.1 i <value>
Start monitoring Legacy 3Com networking equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-IPSO-R1-MIB::a3IPsecureMinLevel OID value, configure state conditions and alerts, and monitor any Legacy 3Com networking equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-AUDL-R1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.12 | a3ComIPSO | A3COM-IPSO-R1-MIB |
| 1.3.6.1.4.1.43.2.12.3 | a3IPsecureParamTable | A3COM-IPSO-R1-MIB |
| 1.3.6.1.4.1.43.2.12.3.1 | a3IPsecureParamEntry | A3COM-IPSO-R1-MIB |
| 1.3.6.1.4.1.43.2.12.3.1.7 | a3IPsecureMinLevel | A3COM-IPSO-R1-MIB |