All MIBs › A3COM-IPSO-R1-MIB › a3IPsecureLabelSysLevel
a3IPsecureLabelSysLevel
Module: A3COM-IPSO-R1-MIB
OID (symbolic): A3COM-IPSO-R1-MIB::a3IPsecureLabelSysLevel
OID (numeric): 1.3.6.1.4.1.43.2.12.3.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter applies to packets originated by this system and sent over this port. When such packets are sent, the value of this parameter determines the IP security level that is attached to the packet before any processing is done.
If this is set to none (1), no IP security information is added to these packets.
If this is set to any other value, any packet originated by this system and sent over this port will have an IP security level added according to the value of this object. A Protection Authority field will also be added to these packets. The contents of the field is determined by the value of a3IPsecureLabelSysAuth.
The security level and Protection Authority flag field must form a label which is legal for transmission on this port. The range of legal values for the security level is defined by a3IPsecureMaxLevel and a3IPsecureMinLevel. The set of legal Protection Authority flags is determined by the entries in a3IPsecureAuthOutTable.
What is a3IPsecureLabelSysLevel?
This integer sets the security classification level for packets originated by the system and transmitted outbound. Operators configure it to stamp outgoing traffic with a consistent security level. Setting it to 'Secret' ensures all locally generated packets leave the port labeled Secret.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.12.3.1.5 snmpwalk -v2c -c public <target> A3COM-IPSO-R1-MIB::a3IPsecureLabelSysLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.12.3.1.5.1 snmpget -v2c -c public <target> A3COM-IPSO-R1-MIB::a3IPsecureLabelSysLevel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.12.3.1.5.1 i <value>
Start monitoring Legacy 3Com networking equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-IPSO-R1-MIB::a3IPsecureLabelSysLevel OID value, configure state conditions and alerts, and monitor any Legacy 3Com networking equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-AUDL-R1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.12 | a3ComIPSO | A3COM-IPSO-R1-MIB |
| 1.3.6.1.4.1.43.2.12.3 | a3IPsecureParamTable | A3COM-IPSO-R1-MIB |
| 1.3.6.1.4.1.43.2.12.3.1 | a3IPsecureParamEntry | A3COM-IPSO-R1-MIB |
| 1.3.6.1.4.1.43.2.12.3.1.5 | a3IPsecureLabelSysLevel | A3COM-IPSO-R1-MIB |