All MIBs › A3COM-HUAWEI-WIPS-MIB › h3cWIPSDctModeScanMode
h3cWIPSDctModeScanMode
Module: A3COM-HUAWEI-WIPS-MIB
OID (symbolic): A3COM-HUAWEI-WIPS-MIB::h3cWIPSDctModeScanMode
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.118.1.9.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: Represents the scanning mode. The radio enable-disable status must be disabled before WIPS scanning mode is configured on this radio. The mesh feature must be disabled before any WIPS scanning mode is set on radio. This radio can not apply any service template before the detectOnly scanning mode is set on the radio.
What is h3cWIPSDctModeScanMode?
This integer OID configures the WIPS scanning mode (requires radio and mesh disabled). Operators choose between different scan profiles like detect-only, active scanning, or passive monitoring. Setting it to detect-only prevents interference with normal service templates.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.118 | h3cWIPS | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.118.1 | h3cWIPSConfigGroup | A3COM-HUAWEI-WIPS-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.118.1.9 | h3cWIPSDctModeTable | A3COM-HUAWEI-WIPS-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.118.1.9.1 | h3cWIPSDctModeEntry | A3COM-HUAWEI-WIPS-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.118.1.9.1.3 | h3cWIPSDctModeScanMode | A3COM-HUAWEI-WIPS-MIB |