All MIBs › A3COM-HUAWEI-STORM-CONSTRAIN-MIB › h3cStormTrapThreshold
h3cStormTrapThreshold
Module: A3COM-HUAWEI-STORM-CONSTRAIN-MIB
OID (symbolic): A3COM-HUAWEI-STORM-CONSTRAIN-MIB::h3cStormTrapThreshold
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.66.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: accessible-for-notify
Description: This value is used to figure the threshold of flux in trap message. For example, when the trap is generated for broadcast flux exceeds upper limit on a port, this value is equal to upper limit value configured. And when the trap is generated for broadcast flux fell under lower limit, this value is equal to lower limit value configured.
What is h3cStormTrapThreshold?
This accessible-for-notify integer reports the threshold value (upper or lower limit) that was crossed to trigger the storm control trap. Engineers use this to correlate alerts back to the configured policies and understand why a port was controlled. A value of 10000 pps indicates either the upper limit was exceeded or the flood rate fell below a recovery threshold.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.66 | h3cStormConstrain | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.66.1 | h3cStormScalarGroup | A3COM-HUAWEI-STORM-CONSTRAIN-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.66.1.2 | h3cStormTrapThreshold | A3COM-HUAWEI-STORM-CONSTRAIN-MIB |