All MIBs › A3COM-HUAWEI-STACK-MIB › h3cStackLinkDelayInterval
h3cStackLinkDelayInterval
Module: A3COM-HUAWEI-STACK-MIB
OID (symbolic): A3COM-HUAWEI-STACK-MIB::h3cStackLinkDelayInterval
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.91.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The delay time for a device in a stack to report the change of stack port link status. If the delay time is configured, a device in a stack will not report the change immediately when the stack port link status changes to down. During the delay period, if the stack port link status is resumed, the device will ignore the current change of the stack port link status. If the stack port link status is not resumed after the delay time, the device will report the change. 0 means no delay, namely, the device will report the change as soon as the stack port link status changes to down.
0: no delay 1-30000(ms): delay time
What is h3cStackLinkDelayInterval?
This read-write integer (0-30000 milliseconds) sets a debounce timer for inter-switch stack link state changes. Engineers use this to prevent false alarms from brief link flaps that would normally trigger failure detection. Setting it to 500ms means a brief down-up event on a stack port will be ignored rather than triggering failover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.91.1.6 snmpwalk -v2c -c public <target> A3COM-HUAWEI-STACK-MIB::h3cStackLinkDelayInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.91.1.6.1 snmpget -v2c -c public <target> A3COM-HUAWEI-STACK-MIB::h3cStackLinkDelayInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.91.1.6.1 i <value>
Start monitoring H3C/HPE stackable switches (IRF) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-STACK-MIB::h3cStackLinkDelayInterval OID value, configure state conditions and alerts, and monitor any H3C/HPE stackable switches (IRF) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.91 | h3cStack | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.91.1 | h3cStackGlobalConfig | A3COM-HUAWEI-STACK-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.91.1.6 | h3cStackLinkDelayInterval | A3COM-HUAWEI-STACK-MIB |