A3COM-HUAWEI-POWER-ETH-EXT-MIB :: h3cPsePortProfileIndex

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-HUAWEI-POWER-ETH-EXT-MIBh3cPsePortProfileIndex

h3cPsePortProfileIndex

Module: A3COM-HUAWEI-POWER-ETH-EXT-MIB

OID (symbolic): A3COM-HUAWEI-POWER-ETH-EXT-MIB::h3cPsePortProfileIndex

OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.14.1.1.7

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Indicates the power profile which is currently associated with this port. This object references the corresponding h3cPseProfileIndex object in the power profiles table. A value of zero is a special case and indicates that no power profile is currently associated with this port. When h3cPseProfileIndex is set to an index of existent profile, pethPsePortPowerPairs, pethPsePortPowerPriority, pethPsePortAdminEnable and h3cPsePortPowerLimit will be set to the same as corresponding value. PethPsePortPowerPairs, pethPsePortPowerPriority and pethPsePortAdminEnable are objects of rfc3621-Power-Ethernet.mib.

What is h3cPsePortProfileIndex?

This Integer32 references a power profile (0-100) that bundles configuration for the port. Administrators create profiles for common device types and assign them to ports for consistent settings. Profile index 5 might represent 'IP Phone' with pre-set power limits.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.14.1.1.7
snmpwalk -v2c -c public <target> A3COM-HUAWEI-POWER-ETH-EXT-MIB::h3cPsePortProfileIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.14.1.1.7.1
snmpget -v2c -c public <target> A3COM-HUAWEI-POWER-ETH-EXT-MIB::h3cPsePortProfileIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.14.1.1.7.1 i <value>

Start monitoring H3C/3Com PoE switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-POWER-ETH-EXT-MIB::h3cPsePortProfileIndex OID value, configure state conditions and alerts, and monitor any H3C/3Com PoE switches from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10h3cA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2h3cCommonA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2.14h3cPowerEthernetExtA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.10.2.14.1h3cPsePortTableA3COM-HUAWEI-POWER-ETH-EXT-MIB
1.3.6.1.4.1.43.45.1.10.2.14.1.1h3cPsePortEntryA3COM-HUAWEI-POWER-ETH-EXT-MIB
1.3.6.1.4.1.43.45.1.10.2.14.1.1.7h3cPsePortProfileIndexA3COM-HUAWEI-POWER-ETH-EXT-MIB