All MIBs › A3COM-HUAWEI-POWER-ETH-EXT-MIB › h3cMainPsePeakPower
h3cMainPsePeakPower
Module: A3COM-HUAWEI-POWER-ETH-EXT-MIB
OID (symbolic): A3COM-HUAWEI-POWER-ETH-EXT-MIB::h3cMainPsePeakPower
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.14.2.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The object specifies the peak power which has been consumed for PoE. It is defined as the highest measured value of power in milliWatts that has been consumed at any one point in time by the sum of the PoE ports. Its value is only reset when the unit is powered on or when it is manually reset by the user as specifiedbelow. It is a read/write integer value with units of Watts (note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters, such as the pethMainPsePower object, in units of Watts). Writing a value of zero to this object resets its value to zero. Writing any other value to this object has noeffect on its value and an error is returned.
What is h3cMainPsePeakPower?
This Integer32 records the highest total power (in Watts) ever drawn across all PoE ports. This helps validate whether the PSE is sized correctly and if expansion is needed. A peak of 108 Watts from a 120W unit shows tight operating margins.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.14.2.1.3 snmpwalk -v2c -c public <target> A3COM-HUAWEI-POWER-ETH-EXT-MIB::h3cMainPsePeakPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.14.2.1.3.1 snmpget -v2c -c public <target> A3COM-HUAWEI-POWER-ETH-EXT-MIB::h3cMainPsePeakPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.14.2.1.3.1 i <value>
Start monitoring H3C/3Com PoE switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-POWER-ETH-EXT-MIB::h3cMainPsePeakPower OID value, configure state conditions and alerts, and monitor any H3C/3Com PoE switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.14 | h3cPowerEthernetExt | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.14.2 | h3cMainPseTable | A3COM-HUAWEI-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.14.2.1 | h3cMainPseEntry | A3COM-HUAWEI-POWER-ETH-EXT-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.14.2.1.3 | h3cMainPsePeakPower | A3COM-HUAWEI-POWER-ETH-EXT-MIB |