All MIBs › A3COM-HUAWEI-NQA-MIB › hwNqaJitterSDOverThreshold

hwNqaJitterSDOverThreshold

OID (symbolic): A3COM-HUAWEI-NQA-MIB::hwNqaJitterSDOverThreshold

OID (numeric): 1.3.6.1.4.1.43.45.1.5.25.28.3.5

Node type: NOTIFICATION-TYPE

Description: The SD means the jitter values from source to destination.

It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold.

The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit and the hwNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum and the hwNqaReactThresholdType is specified as 'accumulative' type.

This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' A3COM-HUAWEI-NQA-MIB::hwNqaJitterSDOverThreshold
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.43.45.1.5.25.28.3.5

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:59652->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (476249860) 55 days, 2:54:58.60
  SNMPv2-MIB::snmpTrapOID.0 = OID: A3COM-HUAWEI-NQA-MIB::hwNqaJitterSDOverThreshold

SNMPv3 example:

snmptrap -v3 -l authPriv -u snmpv3user -a SHA -A "AuthPass1" -x AES -X "PrivPass1" <manager> '' A3COM-HUAWEI-NQA-MIB::hwNqaJitterSDOverThreshold

Start monitoring H3C/3Com routers and switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-NQA-MIB::hwNqaJitterSDOverThreshold OID value, configure state conditions and alerts, and monitor any H3C/3Com routers and switches from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.43	a3Com	A3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.45	jv_mib	A3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1	huawei	A3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.5	huaweiMgmt	A3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.5.25	huaweiDatacomm	A3COM-HUAWEI-OID-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.43.45.1.5.25.28	hwNqa	A3COM-HUAWEI-NQA-MIB
1.3.6.1.4.1.43.45.1.5.25.28.3	hwNqaNotifications	A3COM-HUAWEI-NQA-MIB
1.3.6.1.4.1.43.45.1.5.25.28.3.5	hwNqaJitterSDOverThreshold	A3COM-HUAWEI-NQA-MIB

A3COM-HUAWEI-NQA-MIB :: hwNqaJitterSDOverThreshold

hwNqaJitterSDOverThreshold

Module

This MIB depends on