All MIBs › A3COM-HUAWEI-NQA-MIB › hwNqaJitterDSOverThreshold
hwNqaJitterDSOverThreshold
Module: A3COM-HUAWEI-NQA-MIB
OID (symbolic): A3COM-HUAWEI-NQA-MIB::hwNqaJitterDSOverThreshold
OID (numeric): 1.3.6.1.4.1.43.45.1.5.25.28.3.6
Node type: NOTIFICATION-TYPE
Description: The DS means the jitter values from destination to source.
It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold.
The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit and the hwNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range hwNqaReactThresholdLowerLimit through hwNqaReactThresholdUpperLimit for a number of times specified in hwNqaReactThresholdAccumNum and the hwNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hwNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hwNqajitter.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' A3COM-HUAWEI-NQA-MIB::hwNqaJitterDSOverThreshold snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.43.45.1.5.25.28.3.6
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:63678->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (164693694) 19 days, 1:28:56.94 SNMPv2-MIB::snmpTrapOID.0 = OID: A3COM-HUAWEI-NQA-MIB::hwNqaJitterDSOverThreshold
Start monitoring H3C/3Com routers and switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-NQA-MIB::hwNqaJitterDSOverThreshold OID value, configure state conditions and alerts, and monitor any H3C/3Com routers and switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.5 | huaweiMgmt | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.5.25 | huaweiDatacomm | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.5.25.28 | hwNqa | A3COM-HUAWEI-NQA-MIB |
| 1.3.6.1.4.1.43.45.1.5.25.28.3 | hwNqaNotifications | A3COM-HUAWEI-NQA-MIB |
| 1.3.6.1.4.1.43.45.1.5.25.28.3.6 | hwNqaJitterDSOverThreshold | A3COM-HUAWEI-NQA-MIB |