All MIBs › A3COM-HUAWEI-LAG-MIB › hwAggPortNotAttachedReason
hwAggPortNotAttachedReason
Module: A3COM-HUAWEI-LAG-MIB
OID (symbolic): A3COM-HUAWEI-LAG-MIB::hwAggPortNotAttachedReason
OID (numeric): 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Reason why this port is selected for an aggregator but not attached, 0: The port is attached to this aggregator. 1: The current number of active ports has reached the upper limit. 2: All aggregation resources are already in-use. 3: The port's configuration is improper for being attached. 4: The port's partner is improper for being attached. 5: The number of current active ports has not reached the lower limit. 6: The port's physical state (down) is improper for being attached. 7: The port is not selected for an aggregator. 8: The port's hardware restriction is improper for being attached. 9: The port's speed is improper for being attached. 10: The port's duplex mode is improper for being attached.
What is hwAggPortNotAttachedReason?
This OID explains why a selected port is not yet attached to its aggregation group using a numeric code (0-10). Each code corresponds to a specific constraint: resource limits, configuration mismatch, or partner incompatibility. A value of 1 means the active port count has reached maximum; 4 indicates the port configuration is unsuitable for aggregation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1.2 snmpwalk -v2c -c public <target> A3COM-HUAWEI-LAG-MIB::hwAggPortNotAttachedReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1.2.1 snmpget -v2c -c public <target> A3COM-HUAWEI-LAG-MIB::hwAggPortNotAttachedReason.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1.2.1 i <value>
Start monitoring H3C/3Com/Huawei enterprise switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-LAG-MIB::hwAggPortNotAttachedReason OID value, configure state conditions and alerts, and monitor any H3C/3Com/Huawei enterprise switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.5 | huaweiMgmt | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.5.25 | huaweiDatacomm | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.5.25.25 | hwLAG | A3COM-HUAWEI-LAG-MIB |
| 1.3.6.1.4.1.43.45.1.5.25.25.1 | hwLAGMibObjects | A3COM-HUAWEI-LAG-MIB |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.2 | hwAggPortTable | A3COM-HUAWEI-LAG-MIB |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1 | hwAggPortEntry | A3COM-HUAWEI-LAG-MIB |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1.2 | hwAggPortNotAttachedReason | A3COM-HUAWEI-LAG-MIB |