A3COM-HUAWEI-L4RDT-MIB :: h3cL4RedirectIpExclusionRowStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › A3COM-HUAWEI-L4RDT-MIB › h3cL4RedirectIpExclusionRowStatus

h3cL4RedirectIpExclusionRowStatus

Module: A3COM-HUAWEI-L4RDT-MIB

OID (symbolic): A3COM-HUAWEI-L4RDT-MIB::h3cL4RedirectIpExclusionRowStatus

OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.10.2.1.3

Node type: OBJECT-TYPE

Type: RowStatus

Access: read-create

Description: This object is used to add rows to the Exclusion Table.

The following are the valid values that may be written to RowStatus:

Writing createAndGo(4) to the RowStatus of a non-existent row shall create a new row. The new row shall be active(1). If the row exists, it shall be an error.

Writing createAndWait(5) to the RowStatus of a non-existent row or to an existent row shall be an error.

Writing active(1) to the RowStatus of an existing row shall change the value of that row to active(1). Writing active(1) to the RowStatus of an existing row that is already active(1) shall not cause an error, the row shall remain active(1). If the row does not exist, it shall be an error.

Writing notInService(2) to the RowStatus of an existing row shall change the value of that row to notInService(2). Writing notInService(2) to the RowStatus of an existing row that is already notInService(2) shall not cause an error, the row shall remain notInService(2). If the row does not exist, it shall be an error.

Writing destroy(6) to the RowStatus of a non-existent row shall be an error. If the row exists, it shall be removed.

Writing notReady(3) to the RowStatus of a non-existent row or to an existent row shall be an error.

Attempts to create more entries than the hardware can support shall be rejected.

What is h3cL4RedirectIpExclusionRowStatus?

This OID controls addition and removal of IP addresses from the redirection exclusion table. Engineers use createAndGo(4) to add exempt IPs and destroy(6) to remove them. This allows fine-grained control over which clients bypass cache redirection.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-AUDL-R1-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10h3cA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2h3cCommonA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.10.2.10h3cL4RedirectA3COM-HUAWEI-L4RDT-MIB
1.3.6.1.4.1.43.45.1.10.2.10.2h3cL4RedirectIpExclusionTableA3COM-HUAWEI-L4RDT-MIB
1.3.6.1.4.1.43.45.1.10.2.10.2.1h3cL4RedirectIpExclusionEntryA3COM-HUAWEI-L4RDT-MIB
1.3.6.1.4.1.43.45.1.10.2.10.2.1.3h3cL4RedirectIpExclusionRowStatusA3COM-HUAWEI-L4RDT-MIB