A3COM-HUAWEI-EPON-UNI-MIB :: h3cEponUniVLANTrunkAllowListHigh

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-HUAWEI-EPON-UNI-MIBh3cEponUniVLANTrunkAllowListHigh

h3cEponUniVLANTrunkAllowListHigh

Module: A3COM-HUAWEI-EPON-UNI-MIB

OID (symbolic): A3COM-HUAWEI-EPON-UNI-MIB::h3cEponUniVLANTrunkAllowListHigh

OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.10

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 2049 through 2056, the second octet specifying vlans 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered vlan, and the least significant bit represents the lowest numbered vlan. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans; the vlan is not allowed if its bit has a value of '0'.

What is h3cEponUniVLANTrunkAllowListHigh?

This OID is a bitmap controlling which higher-numbered VLANs (2049-4094) are allowed on the trunk port, structured the same as the low VLAN list. Network engineers configure this to complete VLAN access control across the full VLAN range on trunk interfaces. Combined with the low list, it defines the complete set of permitted VLANs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.10
snmpwalk -v2c -c public <target> A3COM-HUAWEI-EPON-UNI-MIB::h3cEponUniVLANTrunkAllowListHigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.10.1
snmpget -v2c -c public <target> A3COM-HUAWEI-EPON-UNI-MIB::h3cEponUniVLANTrunkAllowListHigh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.10.1 s <value>

Start monitoring H3C EPON ONU devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-EPON-UNI-MIB::h3cEponUniVLANTrunkAllowListHigh OID value, configure state conditions and alerts, and monitor any H3C EPON ONU devices from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10h3cA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2h3cCommonA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2.42h3cEponA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.10.2.42.5h3cEponUniA3COM-HUAWEI-EPON-UNI-MIB
1.3.6.1.4.1.43.45.1.10.2.42.5.1h3cEponUniSysManA3COM-HUAWEI-EPON-UNI-MIB
1.3.6.1.4.1.43.45.1.10.2.42.5.1.1h3cEponUniSysManTableA3COM-HUAWEI-EPON-UNI-MIB
1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1h3cEponUniSysManEntryA3COM-HUAWEI-EPON-UNI-MIB
1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.10h3cEponUniVLANTrunkAllowListHighA3COM-HUAWEI-EPON-UNI-MIB