A3COM-HUAWEI-EPON-UNI-MIB :: h3cEponUniMirrorInboundPortList

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-HUAWEI-EPON-UNI-MIBh3cEponUniMirrorInboundPortList

h3cEponUniMirrorInboundPortList

Module: A3COM-HUAWEI-EPON-UNI-MIB

OID (symbolic): A3COM-HUAWEI-EPON-UNI-MIB::h3cEponUniMirrorInboundPortList

OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: UNI inbound port list. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered UNI, and the least significant bit represents the lowest numbered UNI. Thus, each UNI port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is allowed in the set of ports. the port is not allowed if its bit has a value of '0'.

What is h3cEponUniMirrorInboundPortList?

Contains a bitmask (OCTET STRING) identifying which UNI ports send their inbound traffic to a mirror destination for monitoring. Engineers use port mirroring to copy traffic from production ports to an analysis port for packet capture or IDS. A bit set to 1 means that port's inbound traffic is copied.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.2
snmpwalk -v2c -c public <target> A3COM-HUAWEI-EPON-UNI-MIB::h3cEponUniMirrorInboundPortList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.2.1
snmpget -v2c -c public <target> A3COM-HUAWEI-EPON-UNI-MIB::h3cEponUniMirrorInboundPortList.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.2.1 s <value>

Start monitoring H3C EPON ONU devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-EPON-UNI-MIB::h3cEponUniMirrorInboundPortList OID value, configure state conditions and alerts, and monitor any H3C EPON ONU devices from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10h3cA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2h3cCommonA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2.42h3cEponA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.10.2.42.5h3cEponUniA3COM-HUAWEI-EPON-UNI-MIB
1.3.6.1.4.1.43.45.1.10.2.42.5.1h3cEponUniSysManA3COM-HUAWEI-EPON-UNI-MIB
1.3.6.1.4.1.43.45.1.10.2.42.5.1.13h3cEponUniMirrorGroupTableA3COM-HUAWEI-EPON-UNI-MIB
1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1h3cEponUniMirrorGroupEntryA3COM-HUAWEI-EPON-UNI-MIB
1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.2h3cEponUniMirrorInboundPortListA3COM-HUAWEI-EPON-UNI-MIB