A3COM-HUAWEI-EPON-DEVICE-MIB :: h3cEponDeviceObjectReset

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-HUAWEI-EPON-DEVICE-MIBh3cEponDeviceObjectReset

h3cEponDeviceObjectReset

Module: A3COM-HUAWEI-EPON-DEVICE-MIB

OID (symbolic): A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectReset

OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable is used to reset the EPON device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the EPON device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time.

What is h3cEponDeviceObjectReset?

This read-write enumeration allows remote control of EPON device reset operations, with state values like running(1) and reset(2). Network operators can trigger a warm reset to recover from software hangs without physical access, though data loss and downtime occur. For example, writing reset(2) initiates a reboot; monitoring the value shows when the device transitions back to running(1) after restart.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.1
snmpwalk -v2c -c public <target> A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectReset

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.1.1
snmpget -v2c -c public <target> A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectReset.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.1.1 i <value>

Start monitoring H3C EPON OLT/ONU equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectReset OID value, configure state conditions and alerts, and monitor any H3C EPON OLT/ONU equipment from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10h3cA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2h3cCommonA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2.42h3cEponA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.10.2.42.4h3cEponDeviceMIBA3COM-HUAWEI-EPON-DEVICE-MIB
1.3.6.1.4.1.43.45.1.10.2.42.4.1h3cEponDeviceObjectMIBA3COM-HUAWEI-EPON-DEVICE-MIB
1.3.6.1.4.1.43.45.1.10.2.42.4.1.1h3cEponDeviceObjectsA3COM-HUAWEI-EPON-DEVICE-MIB
1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1h3cEponDeviceControlObjectsA3COM-HUAWEI-EPON-DEVICE-MIB
1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1h3cEponDeviceControlTableA3COM-HUAWEI-EPON-DEVICE-MIB
1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1h3cEponDeviceControlEntryA3COM-HUAWEI-EPON-DEVICE-MIB
1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.1h3cEponDeviceObjectResetA3COM-HUAWEI-EPON-DEVICE-MIB