All MIBs › A3COM-HUAWEI-EPON-DEVICE-MIB › h3cEponDeviceObjectReportThreshold
h3cEponDeviceObjectReportThreshold
Module: A3COM-HUAWEI-EPON-DEVICE-MIB
OID (symbolic): A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectReportThreshold
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: A set of 8 integers, for each LLID, that defines the threshold reporting for each Queue in the REPORT message, as defined in [802.3ah] 64. First Queue set reporting will provide information on the queue occupancy of frames below this Threshold. The value returned shall be in Time quanta (TQ) which is 16nsec or 2 octets increments. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
What is h3cEponDeviceObjectReportThreshold?
This configurable threshold (in 16-nanosecond time quanta increments) determines when the device reports queue occupancy in REPORT messages. Setting it appropriately balances bandwidth efficiency with latency visibility; too high ignores congestion, too low causes overhead. A typical value might be 1000 TQ units to trigger reports when queue depth approaches saturation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.9 snmpwalk -v2c -c public <target> A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectReportThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.9.1 snmpget -v2c -c public <target> A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectReportThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.9.1 i <value>
Start monitoring H3C EPON OLT/ONU equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectReportThreshold OID value, configure state conditions and alerts, and monitor any H3C EPON OLT/ONU equipment from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42 | h3cEpon | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.42.4 | h3cEponDeviceMIB | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1 | h3cEponDeviceObjectMIB | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1 | h3cEponDeviceObjects | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1 | h3cEponDeviceControlObjects | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1 | h3cEponDeviceControlTable | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1 | h3cEponDeviceControlEntry | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.9 | h3cEponDeviceObjectReportThreshold | A3COM-HUAWEI-EPON-DEVICE-MIB |