All MIBs › A3COM-HUAWEI-EPON-DEVICE-MIB › h3cEponDeviceObjectFecEnabled
h3cEponDeviceObjectFecEnabled
Module: A3COM-HUAWEI-EPON-DEVICE-MIB
OID (symbolic): A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectFecEnabled
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable defines and provides information whether the EPON device uses FEC as defined in the [802.3ah] clause 65.2 for EPON. When noFECEnabled(1) the device does not support FEC mode When fecTxEnabled(2) the device supports the FEC transmission mode. When fecRxEnabled(3) the device supports the FEC Receive mode. When fecTxRxEnabled(4) the device supports the FEC transmission and receive mode. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
What is h3cEponDeviceObjectFecEnabled?
This configurable OID reports the Forward Error Correction (FEC) support mode—whether it's disabled, transmit-only, receive-only, or bidirectional. FEC is critical for signal integrity in optical networks; enabling it reduces errors but increases overhead. A typical value is 4, meaning the device supports full FEC transmission and reception for reliability.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.4 snmpwalk -v2c -c public <target> A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectFecEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.4.1 snmpget -v2c -c public <target> A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectFecEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.4.1 i <value>
Start monitoring H3C EPON OLT/ONU equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-EPON-DEVICE-MIB::h3cEponDeviceObjectFecEnabled OID value, configure state conditions and alerts, and monitor any H3C EPON OLT/ONU equipment from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42 | h3cEpon | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.42.4 | h3cEponDeviceMIB | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1 | h3cEponDeviceObjectMIB | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1 | h3cEponDeviceObjects | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1 | h3cEponDeviceControlObjects | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1 | h3cEponDeviceControlTable | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1 | h3cEponDeviceControlEntry | A3COM-HUAWEI-EPON-DEVICE-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.4 | h3cEponDeviceObjectFecEnabled | A3COM-HUAWEI-EPON-DEVICE-MIB |