A3COM-HUAWEI-EFM-COMMON-MIB :: h3cDot3OamVariableResponseTx

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-HUAWEI-EFM-COMMON-MIBh3cDot3OamVariableResponseTx

h3cDot3OamVariableResponseTx

Module: A3COM-HUAWEI-EFM-COMMON-MIB

OID (symbolic): A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamVariableResponseTx

OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.42.3.1.4.1.11

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: A count of the number of Variable Response OAMPDUs transmitted on this interface.

An Variable Response OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Variable Response code.

Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.

What is h3cDot3OamVariableResponseTx?

This read-only counter tracks Variable Response OAMPDUs sent in reply to peer variable requests, completing the remote data retrieval cycle. Engineers use this to confirm local responsiveness to remote queries and to measure OAM data-plane activity. An increasing count shows the device is actively servicing peer diagnostic requests.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.3.1.4.1.11
snmpwalk -v2c -c public <target> A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamVariableResponseTx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.3.1.4.1.11.1
snmpget -v2c -c public <target> A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamVariableResponseTx.1

Start monitoring H3C/3Com/Huawei Ethernet switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamVariableResponseTx OID value, configure state conditions and alerts, and monitor any H3C/3Com/Huawei Ethernet switches and routers from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10h3cA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2h3cCommonA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2.42h3cEponA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.10.2.42.3h3cEfmOamMIBA3COM-HUAWEI-EFM-COMMON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.3.1h3cDot3OamMIBA3COM-HUAWEI-EFM-COMMON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.3.1.4h3cDot3OamStatsTableA3COM-HUAWEI-EFM-COMMON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.3.1.4.1h3cDot3OamStatsEntryA3COM-HUAWEI-EFM-COMMON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.3.1.4.1.11h3cDot3OamVariableResponseTxA3COM-HUAWEI-EFM-COMMON-MIB