All MIBs › A3COM-HUAWEI-EFM-COMMON-MIB › h3cDot3OamPeerMaxOamPduSize
h3cDot3OamPeerMaxOamPduSize
Module: A3COM-HUAWEI-EFM-COMMON-MIB
OID (symbolic): A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamPeerMaxOamPduSize
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.42.3.1.2.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this interface must not use OAMPDUs that exceed this size. The maximum OAMPDU size can be determined from the PDU Configuration field of the Local Information TLV of the last Information OAMPDU received from the peer. This value is initialized to 64, and is invalid if the h3cDot3OamPeerStatus is inactive.
An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs.
What is h3cDot3OamPeerMaxOamPduSize?
This read-only integer (64–1522 bytes) specifies the largest OAMPDU frame the peer can receive, extracted from its Information OAMPDU and defaulting to 64. Network managers enforce this limit locally to avoid sending oversized OAM frames that would be discarded or truncated. A value of 1522 indicates full Ethernet frame support with minimal padding.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.3.1.2.1.6 snmpwalk -v2c -c public <target> A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamPeerMaxOamPduSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.3.1.2.1.6.1 snmpget -v2c -c public <target> A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamPeerMaxOamPduSize.1
Start monitoring H3C/3Com/Huawei Ethernet switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamPeerMaxOamPduSize OID value, configure state conditions and alerts, and monitor any H3C/3Com/Huawei Ethernet switches and routers from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42 | h3cEpon | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.42.3 | h3cEfmOamMIB | A3COM-HUAWEI-EFM-COMMON-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.3.1 | h3cDot3OamMIB | A3COM-HUAWEI-EFM-COMMON-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.3.1.2 | h3cDot3OamPeerTable | A3COM-HUAWEI-EFM-COMMON-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.3.1.2.1 | h3cDot3OamPeerEntry | A3COM-HUAWEI-EFM-COMMON-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.42.3.1.2.1.6 | h3cDot3OamPeerMaxOamPduSize | A3COM-HUAWEI-EFM-COMMON-MIB |