A3COM-HUAWEI-EFM-COMMON-MIB :: h3cDot3OamEventLogType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-HUAWEI-EFM-COMMON-MIBh3cDot3OamEventLogType

h3cDot3OamEventLogType

Module: A3COM-HUAWEI-EFM-COMMON-MIB

OID (symbolic): A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamEventLogType

OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.42.3.1.6.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The type of event that generated this entry in the event log.

When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSymbolEvent(1), erroredFramePeriodEvent (2), erroredFrameEvent(3), erroredFrameSecondsEvent(4), linkFault(256), dyingGaspEvent(257), criticalLinkEvent(258) The first four are considered threshold crossing events as they are generated when a metric exceeds a given value within a specified window. The other three are not threshold crossing events.

When the OUI is not 0x0180C2, then some other organization has defined the event space. If event subtyping is known to the implementation, it may be reflected here. Otherwise, this value should return all Fs (0xFFFFFFFF).

What is h3cDot3OamEventLogType?

This OID specifies the category of link problem detected—values like 1 (erroredSymbolEvent), 2 (erroredFrameEvent), or 256 (linkFault). Engineers rely on event type to triage issues: symbol errors indicate marginal signal quality, while linkFault means the link went down. A value of 257 (dyingGaspEvent) tells the engineer the remote end is experiencing a critical failure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.3.1.6.1.4
snmpwalk -v2c -c public <target> A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamEventLogType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.42.3.1.6.1.4.1
snmpget -v2c -c public <target> A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamEventLogType.1

Start monitoring H3C/3Com/Huawei Ethernet switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-EFM-COMMON-MIB::h3cDot3OamEventLogType OID value, configure state conditions and alerts, and monitor any H3C/3Com/Huawei Ethernet switches and routers from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10h3cA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2h3cCommonA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.10.2.42h3cEponA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.10.2.42.3h3cEfmOamMIBA3COM-HUAWEI-EFM-COMMON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.3.1h3cDot3OamMIBA3COM-HUAWEI-EFM-COMMON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.3.1.6h3cDot3OamEventLogTableA3COM-HUAWEI-EFM-COMMON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.3.1.6.1h3cDot3OamEventLogEntryA3COM-HUAWEI-EFM-COMMON-MIB
1.3.6.1.4.1.43.45.1.10.2.42.3.1.6.1.4h3cDot3OamEventLogTypeA3COM-HUAWEI-EFM-COMMON-MIB