All MIBs › A3COM-HUAWEI-DOT11S-MESH-MIB › h3cDot11sMeshPflBackhaulRate
h3cDot11sMeshPflBackhaulRate
Module: A3COM-HUAWEI-DOT11S-MESH-MIB
OID (symbolic): A3COM-HUAWEI-DOT11S-MESH-MIB::h3cDot11sMeshPflBackhaulRate
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: This object represents the link backhaul rate.
What is h3cDot11sMeshPflBackhaulRate?
This Integer32 configures the data rate used for backhaul links that relay mesh traffic between nodes. Engineers lower this rate for distant or marginal-signal nodes to improve reliability; higher rates increase throughput over strong links. A value of 54 sets the backhaul to 54 Mbps, balancing speed and robustness.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75 | h3cDot11 | A3COM-HUAWEI-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.75.11 | h3cDot11sMesh | A3COM-HUAWEI-DOT11S-MESH-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75.11.1 | h3cDot11sConfigGroup | A3COM-HUAWEI-DOT11S-MESH-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75.11.1.2 | h3cDot11sMeshPflTable | A3COM-HUAWEI-DOT11S-MESH-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1 | h3cDot11sMeshPflEntry | A3COM-HUAWEI-DOT11S-MESH-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75.11.1.2.1.5 | h3cDot11sMeshPflBackhaulRate | A3COM-HUAWEI-DOT11S-MESH-MIB |