All MIBs › A3COM-HUAWEI-DOT11-RRM-MIB › h3cDot11RRMChlProntoRadioElmt
h3cDot11RRMChlProntoRadioElmt
Module: A3COM-HUAWEI-DOT11-RRM-MIB
OID (symbolic): A3COM-HUAWEI-DOT11-RRM-MIB::h3cDot11RRMChlProntoRadioElmt
OID (numeric): 1.3.6.1.4.1.43.45.1.10.2.75.8.1.2.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
What is h3cDot11RRMChlProntoRadioElmt?
This Unsigned32 identifies a specific AP and radio to change channel at the next calibration cycle, using a packed format (upper 24 bits = AP index, lower 8 bits = radio index). Reading it returns 0; writing 4294967295 affects all radios on all APs. An engineer writes 0x010001 (AP 1, radio 1) to force a manual channel change for diagnostics.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.75.8.1.2.1.4 snmpwalk -v2c -c public <target> A3COM-HUAWEI-DOT11-RRM-MIB::h3cDot11RRMChlProntoRadioElmt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.10.2.75.8.1.2.1.4.1 snmpget -v2c -c public <target> A3COM-HUAWEI-DOT11-RRM-MIB::h3cDot11RRMChlProntoRadioElmt.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.45.1.10.2.75.8.1.2.1.4.1 i <value>
Start monitoring H3C wireless controllers and APs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-DOT11-RRM-MIB::h3cDot11RRMChlProntoRadioElmt OID value, configure state conditions and alerts, and monitor any H3C wireless controllers and APs from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10 | h3c | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2 | h3cCommon | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75 | h3cDot11 | A3COM-HUAWEI-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.75.8 | h3cDot11RRM | A3COM-HUAWEI-DOT11-RRM-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75.8.1 | h3cDot11RRMConfigGroup | A3COM-HUAWEI-DOT11-RRM-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75.8.1.2 | h3cDot11RRMRadioCfgTable | A3COM-HUAWEI-DOT11-RRM-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75.8.1.2.1 | h3cDot11RRMRadioCfgEntry | A3COM-HUAWEI-DOT11-RRM-MIB |
| 1.3.6.1.4.1.43.45.1.10.2.75.8.1.2.1.4 | h3cDot11RRMChlProntoRadioElmt | A3COM-HUAWEI-DOT11-RRM-MIB |