All MIBs › A3COM-FILTER-R5-MIB › a3filterPolicyContext
a3filterPolicyContext
Module: A3COM-FILTER-R5-MIB
OID (symbolic): A3COM-FILTER-R5-MIB::a3filterPolicyContext
OID (numeric): 1.3.6.1.4.1.43.2.10.6.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Supplies conditions on when to apply the masks to a packet. These conditions relate to the source and destination ports of a packet. All (1) means apply the action in all contexts. AT (2) means apply the action if the packet is received from or distined to the ports specified by a3filterPolicyPorts1. TO (3) means apply the action if the packet is destined to those ports. FROM (4) means apply the action if the packet is received from one of those specified ports. FROM ports1 TO ports2 (5) means apply the action if the packet is received from the ports defined by a3filterPolicyPorts1 and destined to the port defined by a3filterPolicyPorts2. BETWEEN ports1 AND ports2 (6) means apply the action if the packet is received from one of the ports defined by a3filterPolicyPorts1 and destined for one of the ports defined by a3filterPolicyPorts2 or if the packet is received from one of the ports defined by a3filterPolicyPorts2 and destined for one of the ports defined by a3filterPolicyPorts1. Finally AMONG (7) means apply the action if the packet is received from and destined to one of the ports specified by a3filterPolicyPorts1
What is a3filterPolicyContext?
This enumerated integer defines when masks apply to packets—either all traffic, specific source/destination ports, or only incoming/outgoing traffic. Administrators use this to scope filter policies to relevant traffic patterns and avoid unintended filtering. Value 1 (All) applies the filter globally, while value 2 (AT) applies only at specified ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.10.6.1.8 snmpwalk -v2c -c public <target> A3COM-FILTER-R5-MIB::a3filterPolicyContext
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.10.6.1.8.1 snmpget -v2c -c public <target> A3COM-FILTER-R5-MIB::a3filterPolicyContext.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.10.6.1.8.1 i <value>
Start monitoring 3Com R5-software routers/switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-FILTER-R5-MIB::a3filterPolicyContext OID value, configure state conditions and alerts, and monitor any 3Com R5-software routers/switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-AUDL-R1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.10 | a3ComFilter | A3COM-FILTER-R5-MIB |
| 1.3.6.1.4.1.43.2.10.6 | a3filterPolicyTable | A3COM-FILTER-R5-MIB |
| 1.3.6.1.4.1.43.2.10.6.1 | a3filterPolicyEntry | A3COM-FILTER-R5-MIB |
| 1.3.6.1.4.1.43.2.10.6.1.8 | a3filterPolicyContext | A3COM-FILTER-R5-MIB |