All MIBs › A3COM-BRIDGE-R3-MIB › a3ComBrgStExtWaAddress
a3ComBrgStExtWaAddress
Module: A3COM-BRIDGE-R3-MIB
OID (symbolic): A3COM-BRIDGE-R3-MIB::a3ComBrgStExtWaAddress
OID (numeric): 1.3.6.1.4.1.43.2.9.1.10.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: When the destination port to which this table entry applies is a wide area port, this object is used to identify the wide area address to use when forwarding packets to this destination. The type of address can be determined by the ifType value corresponding to the port identified by dot1dStaticAllowedToGoTo or dot1dTpFdbPort. If the port is not a wide area port, this object will contain a zero length string.
The representation of the addresses will follow the convention used in standard MIBs. For example, Frame Relay DLCI's will be encoded as binary numbers and placed in the OCTET STRING. X.25 addresses, on the other hand will be encoded as ASCII characters [0..9], with each octet of the OCTET STRING containing the ASCII representation of one digit.
What is a3ComBrgStExtWaAddress?
This read-only OCTET STRING holds the wide area address (WAN link address) used for forwarding frames out a wide area port, when applicable. For wide area interfaces (X.25, frame relay), this contains the remote address; for LAN ports, it is empty. For example, an X.25 static entry might contain a DTE address like 31325551234 to route frames to that remote DTE.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.9.1.10.1.3 snmpwalk -v2c -c public <target> A3COM-BRIDGE-R3-MIB::a3ComBrgStExtWaAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.9.1.10.1.3.1 snmpget -v2c -c public <target> A3COM-BRIDGE-R3-MIB::a3ComBrgStExtWaAddress.1
Start monitoring 3Com legacy switches (SuperStack/CoreBuilder) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-BRIDGE-R3-MIB::a3ComBrgStExtWaAddress OID value, configure state conditions and alerts, and monitor any 3Com legacy switches (SuperStack/CoreBuilder) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9 | a3ComBridge | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.1 | a3ComBrgGen | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.1.10 | a3ComBrgStExtTable | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.1.10.1 | a3ComBrgStExtEntry | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.1.10.1.3 | a3ComBrgStExtWaAddress | A3COM-BRIDGE-R3-MIB |