All MIBs › A3COM-BRIDGE-R3-MIB › a3ComBrgSrcSecCtl
a3ComBrgSrcSecCtl
Module: A3COM-BRIDGE-R3-MIB
OID (symbolic): A3COM-BRIDGE-R3-MIB::a3ComBrgSrcSecCtl
OID (numeric): 1.3.6.1.4.1.43.2.9.1.12.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is a security feature that allows the control of packets sent from specific source addresses. If this object is set to forward (2), this port will forward only those packets sent from addresses listed in the static forwarding table for this port. If this object is set to block, this port will block every packet sent by a station whose address is listed in the static forwarding table for this port. Note, these actions are taken by this port after it receives a packet from the network. This does not apply to packets it forwards to the network.
What is a3ComBrgSrcSecCtl?
This read-write integer controls source address filtering, allowing only frames from whitelisted (forward=2) or blacklisted (block=3) source MACs in the static table. This prevents rogue or spoofed devices from injecting traffic through the port, improving network security. Setting this to 2 (forward) allows only traffic from MACs listed in the static table for that port to pass through.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.9.1.12.1.4 snmpwalk -v2c -c public <target> A3COM-BRIDGE-R3-MIB::a3ComBrgSrcSecCtl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.9.1.12.1.4.1 snmpget -v2c -c public <target> A3COM-BRIDGE-R3-MIB::a3ComBrgSrcSecCtl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.9.1.12.1.4.1 i <value>
Start monitoring 3Com legacy switches (SuperStack/CoreBuilder) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-BRIDGE-R3-MIB::a3ComBrgSrcSecCtl OID value, configure state conditions and alerts, and monitor any 3Com legacy switches (SuperStack/CoreBuilder) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9 | a3ComBridge | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.1 | a3ComBrgGen | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.1.12 | a3ComBrgPortTable | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.1.12.1 | a3ComBrgPortEntry | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.1.12.1.4 | a3ComBrgSrcSecCtl | A3COM-BRIDGE-R3-MIB |