All MIBs › A3COM-BRIDGE-R3-MIB › a3ComBrgSrPortMinAccessPrior
a3ComBrgSrPortMinAccessPrior
Module: A3COM-BRIDGE-R3-MIB
OID (symbolic): A3COM-BRIDGE-R3-MIB::a3ComBrgSrPortMinAccessPrior
OID (numeric): 1.3.6.1.4.1.43.2.9.3.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter determines the minimum access priority used for outoing frames on this port. End systems usually have a low access priority while bridges have a medium priority. This allows bridge, which typically handle larger volumes of data, to get the token faster than end systems. If the user priority of the frame is greateer than the minumum access priority, the user priority is used as the access priority. The user priority of the frame is determined by the access priority of the incoming frame.
What is a3ComBrgSrPortMinAccessPrior?
This integer (0 to 6) sets the minimum priority at which frames exit this Token Ring source routing port, allowing bridges to claim priority over end stations. Engineers configure this so latency-sensitive bridge traffic does not get delayed waiting for token access by lower-priority end nodes. A value of 3 ensures outgoing bridge traffic uses priority 3 or higher.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.9.3.2.1.5 snmpwalk -v2c -c public <target> A3COM-BRIDGE-R3-MIB::a3ComBrgSrPortMinAccessPrior
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.9.3.2.1.5.1 snmpget -v2c -c public <target> A3COM-BRIDGE-R3-MIB::a3ComBrgSrPortMinAccessPrior.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.9.3.2.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> a3ComBrgSrPortMinAccessPrior.1
Start monitoring 3Com legacy switches (SuperStack/CoreBuilder) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-BRIDGE-R3-MIB::a3ComBrgSrPortMinAccessPrior OID value, configure state conditions and alerts, and monitor any 3Com legacy switches (SuperStack/CoreBuilder) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9 | a3ComBridge | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.3 | a3ComBrgSr | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.3.2 | a3ComBrgSrPortTable | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.3.2.1 | a3ComBrgSrPortEntry | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2.9.3.2.1.5 | a3ComBrgSrPortMinAccessPrior | A3COM-BRIDGE-R3-MIB |