A3COM-BRIDGE-R3-MIB :: a3ComBrgAppleCtl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-BRIDGE-R3-MIBa3ComBrgAppleCtl

a3ComBrgAppleCtl

Module: A3COM-BRIDGE-R3-MIB

OID (symbolic): A3COM-BRIDGE-R3-MIB::a3ComBrgAppleCtl

OID (numeric): 1.3.6.1.4.1.43.2.9.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object enables the bridge to forward AppleTalk packets between Ethernet, FDDI, and token ring networks. The AppleTalk packets require encapsulation over FDDI networks. If AppleTalk packets are to be translated the same way as other Ethernet packets are translated, this parameter must be disabled (2).

If this object is enabled, the original format of both AT-1 (Ethernet) and AT-2 (SNAP) packets are preserved when bridging between Ethernets over an FDDI backbone. If this is disabled, AT-2 packets are converted to Ethernet format before going across the FDDI backbone.

What is a3ComBrgAppleCtl?

This read-write integer controls whether the bridge forwards AppleTalk frames across Ethernet, FDDI, and token ring networks with format preservation. Enabling AppleTalk bridging (value 1) maintains the original frame format when translating between media types, critical for legacy networks. Setting this to 1 on a multi-media bridge ensures AppleTalk traffic preserves its encapsulation across Ethernet and FDDI segments.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.9.1.6
snmpwalk -v2c -c public <target> A3COM-BRIDGE-R3-MIB::a3ComBrgAppleCtl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.9.1.6.1
snmpget -v2c -c public <target> A3COM-BRIDGE-R3-MIB::a3ComBrgAppleCtl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.9.1.6.1 i <value>

Start monitoring 3Com legacy switches (SuperStack/CoreBuilder) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-BRIDGE-R3-MIB::a3ComBrgAppleCtl OID value, configure state conditions and alerts, and monitor any 3Com legacy switches (SuperStack/CoreBuilder) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2.9a3ComBridgeA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2.9.1a3ComBrgGenA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2.9.1.6a3ComBrgAppleCtlA3COM-BRIDGE-R3-MIB