All MIBs › ZYXEL-REMOTE-PORT-MIRROR-MIB › zyRemotePortMirrorSourceReflectorPort
zyRemotePortMirrorSourceReflectorPort
Module: ZYXEL-REMOTE-PORT-MIRROR-MIB
OID (symbolic): ZYXEL-REMOTE-PORT-MIRROR-MIB::zyRemotePortMirrorSourceReflectorPort
OID (numeric): 1.3.6.1.4.1.890.1.15.3.73.1.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Set port members to be the source reflector-port. The reflector port is the mechanism that copies packets onto an remote mirror VLAN. The reflector port forwards only traffic from remote mirror VLAN with which it is affiliated: 1. A reflector-port is only existed in source switch. 2. Spanning tree is automatically disabled on a reflector-port. 3. It is a port set to loopback. 4. The reflector port loops back untagged traffic to the switch. The traffic is then placed on the RSPAN VLAN and flooded to any trunk ports that carry the RSPAN VLAN. 5. The reflector-port can not be mirror-port and monitor-port.
What is zyRemotePortMirrorSourceReflectorPort?
This read-write INTEGER designates which physical port acts as the reflector-port that loops back untagged mirrored traffic onto the remote mirror VLAN, a port on which spanning tree is automatically disabled and that cannot also serve as a mirror-port or monitor-port. Admins configure this when multi-mirroring is enabled, dedicating a port purely to reflecting captured traffic onto the RSPAN VLAN. For example, an admin might set this to port 24, a port not otherwise in active use, to serve as the loopback reflector for mirrored VLAN traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.73.1.2.1.6 snmpwalk -v2c -c public <target> ZYXEL-REMOTE-PORT-MIRROR-MIB::zyRemotePortMirrorSourceReflectorPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.73.1.2.1.6.1 snmpget -v2c -c public <target> ZYXEL-REMOTE-PORT-MIRROR-MIB::zyRemotePortMirrorSourceReflectorPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.15.3.73.1.2.1.6.1 i <value>
Start monitoring ZyXEL managed switch (RSPAN-style remote mirror source/destination/VLAN config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-REMOTE-PORT-MIRROR-MIB::zyRemotePortMirrorSourceReflectorPort OID value, configure state conditions and alerts, and monitor any ZyXEL managed switch (RSPAN-style remote mirror source/destination/VLAN config status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | IES5206-MIB |
| 1.3.6.1.4.1.890.1 | products | IES5206-MIB |
| 1.3.6.1.4.1.890.1.15 | nwa1100nh | NWA1100-NH |
| 1.3.6.1.4.1.890.1.15.3 | esMgmt | NWA1100-NH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.73 | zyxelRemotePortMirror | ZYXEL-REMOTE-PORT-MIRROR-MIB |
| 1.3.6.1.4.1.890.1.15.3.73.1 | zyxelRemotePortMirrorSetup | ZYXEL-REMOTE-PORT-MIRROR-MIB |
| 1.3.6.1.4.1.890.1.15.3.73.1.2 | zyxelRemotePortMirrorTable | ZYXEL-REMOTE-PORT-MIRROR-MIB |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1 | zyxelRemotePortMirrorEntry | ZYXEL-REMOTE-PORT-MIRROR-MIB |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.6 | zyRemotePortMirrorSourceReflectorPort | ZYXEL-REMOTE-PORT-MIRROR-MIB |