All MIBs › ZYXEL-REMOTE-PORT-MIRROR-MIB › zyRemotePortMirrorDestinationMonitorPort
zyRemotePortMirrorDestinationMonitorPort
Module: ZYXEL-REMOTE-PORT-MIRROR-MIB
OID (symbolic): ZYXEL-REMOTE-PORT-MIRROR-MIB::zyRemotePortMirrorDestinationMonitorPort
OID (numeric): 1.3.6.1.4.1.890.1.15.3.73.1.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Set the port number of the destination monitor port. The monitor-port is the port that we can monitor the RMirror traffic: 1. A monitor-port is only in destination switch. 2. It can participate in only one RMirror VLAN at a time. 3. A monitor-port in one RMirror VLAN cannot be another RMirror VLAN. 4. A monitor-port can not be a mirror-port, reflector-port and connected-port.
What is zyRemotePortMirrorDestinationMonitorPort?
This read-write INTEGER sets the port number of the destination monitor port, the port on the destination switch where mirrored RMirror traffic can be observed; per the description a monitor-port can belong to only one RMirror VLAN and cannot also be a mirror-port, reflector-port, or connected-port. Admins connect a packet analyzer or IDS to whichever port they configure here to inspect the mirrored traffic. For example, setting zyRemotePortMirrorDestinationMonitorPort to port 10 means a sniffer plugged into port 10 will see all traffic mirrored through this remote mirror VLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.73.1.2.1.7 snmpwalk -v2c -c public <target> ZYXEL-REMOTE-PORT-MIRROR-MIB::zyRemotePortMirrorDestinationMonitorPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.73.1.2.1.7.1 snmpget -v2c -c public <target> ZYXEL-REMOTE-PORT-MIRROR-MIB::zyRemotePortMirrorDestinationMonitorPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.15.3.73.1.2.1.7.1 i <value>
Start monitoring ZyXEL managed switch (RSPAN-style remote mirror source/destination/VLAN config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-REMOTE-PORT-MIRROR-MIB::zyRemotePortMirrorDestinationMonitorPort OID value, configure state conditions and alerts, and monitor any ZyXEL managed switch (RSPAN-style remote mirror source/destination/VLAN config status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | IES5206-MIB |
| 1.3.6.1.4.1.890.1 | products | IES5206-MIB |
| 1.3.6.1.4.1.890.1.15 | nwa1100nh | NWA1100-NH |
| 1.3.6.1.4.1.890.1.15.3 | esMgmt | NWA1100-NH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.73 | zyxelRemotePortMirror | ZYXEL-REMOTE-PORT-MIRROR-MIB |
| 1.3.6.1.4.1.890.1.15.3.73.1 | zyxelRemotePortMirrorSetup | ZYXEL-REMOTE-PORT-MIRROR-MIB |
| 1.3.6.1.4.1.890.1.15.3.73.1.2 | zyxelRemotePortMirrorTable | ZYXEL-REMOTE-PORT-MIRROR-MIB |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1 | zyxelRemotePortMirrorEntry | ZYXEL-REMOTE-PORT-MIRROR-MIB |
| 1.3.6.1.4.1.890.1.15.3.73.1.2.1.7 | zyRemotePortMirrorDestinationMonitorPort | ZYXEL-REMOTE-PORT-MIRROR-MIB |