All MIBs › ZYXEL-QUEUING-METHOD-MIB › zyQueuingMethodHybridSpqPortQueue
zyQueuingMethodHybridSpqPortQueue
Module: ZYXEL-QUEUING-METHOD-MIB
OID (symbolic): ZYXEL-QUEUING-METHOD-MIB::zyQueuingMethodHybridSpqPortQueue
OID (numeric): 1.3.6.1.4.1.890.1.15.3.70.1.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is applicable only when you select WFQ or WRR. Select a queue to have the switch use SPQ to service the subsequent queue after and including the specified queue.This is applicable only when you select WFQ or WRR.
What is zyQueuingMethodHybridSpqPortQueue?
In a hybrid scheduling arrangement, meaningful only when the port mode is set to weighted fair queuing or weighted round robin, this object selects the queue number at and above which the switch reverts to strict-priority servicing instead of the weighted algorithm, letting the very highest-priority queues bypass the weighted scheme entirely. An admin sets this to guarantee that critical traffic in the top queues is always serviced immediately even while the rest of the port's queues share bandwidth under the weighted scheme. For example, setting zyQueuingMethodHybridSpqPortQueue to q6 would make queues 6 and 7 always serviced with strict priority, while queues 0 through 5 continue sharing bandwidth under the port's configured weighted scheme.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.70.1.2.1.1 snmpwalk -v2c -c public <target> ZYXEL-QUEUING-METHOD-MIB::zyQueuingMethodHybridSpqPortQueue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.70.1.2.1.1.1 snmpget -v2c -c public <target> ZYXEL-QUEUING-METHOD-MIB::zyQueuingMethodHybridSpqPortQueue.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.15.3.70.1.2.1.1.1 i <value>
Start monitoring ZyXEL switch, ZyXEL router (egress queue-scheduling-method config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-QUEUING-METHOD-MIB::zyQueuingMethodHybridSpqPortQueue OID value, configure state conditions and alerts, and monitor any ZyXEL switch, ZyXEL router (egress queue-scheduling-method config status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | IES5206-MIB |
| 1.3.6.1.4.1.890.1 | products | IES5206-MIB |
| 1.3.6.1.4.1.890.1.15 | nwa1100nh | NWA1100-NH |
| 1.3.6.1.4.1.890.1.15.3 | esMgmt | NWA1100-NH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.70 | zyxelQueuingMethod | ZYXEL-QUEUING-METHOD-MIB |
| 1.3.6.1.4.1.890.1.15.3.70.1 | zyxelQueuingMethodSetup | ZYXEL-QUEUING-METHOD-MIB |
| 1.3.6.1.4.1.890.1.15.3.70.1.2 | zyxelQueuingMethodHybridSpqPortTable | ZYXEL-QUEUING-METHOD-MIB |
| 1.3.6.1.4.1.890.1.15.3.70.1.2.1 | zyxelQueuingMethodHybridSpqPortEntry | ZYXEL-QUEUING-METHOD-MIB |
| 1.3.6.1.4.1.890.1.15.3.70.1.2.1.1 | zyQueuingMethodHybridSpqPortQueue | ZYXEL-QUEUING-METHOD-MIB |