All MIBs › ZYXEL-L2PT-MIB › zyL2ptPointToPointProtocolGroup
zyL2ptPointToPointProtocolGroup
Module: ZYXEL-L2PT-MIB
OID (symbolic): ZYXEL-L2PT-MIB::zyL2ptPointToPointProtocolGroup
OID (numeric): 1.3.6.1.4.1.890.1.15.3.39.1.3.1.2
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: Enable/Disable L2PT point-to-point protocols on the port. The switch supports PAgP (Port Aggregation Protocol), LACP (Link Aggregation Control Protocol) and UDLD (UniDirectional Link Detection) tunneling for a point-to-point topology. Both PAgP and UDLD are Cisco's proprietary data link layer protocols. PAgP is similar to LACP and used to set up a logical aggregation of Ethernet ports automatically. UDLD is to determine the link's physical status and detect a unidirectional link.
What is zyL2ptPointToPointProtocolGroup?
This read-write BITS value enables or disables L2PT tunneling on the port for point-to-point protocols: pagp(0), Cisco's Port Aggregation Protocol similar to LACP for automatic link aggregation, lacp(1), the standard Link Aggregation Control Protocol, and udld(2), UniDirectional Link Detection used to determine a link's physical status and detect unidirectional link faults. Admins set the relevant bits to tunnel these specific point-to-point control protocols between customer sites across the provider network. For example, an admin sets the udld(2) bit on a customer-facing port so the customer's UDLD-based unidirectional link detection continues to function correctly across the provider's network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.39.1.3.1.2 snmpwalk -v2c -c public <target> ZYXEL-L2PT-MIB::zyL2ptPointToPointProtocolGroup
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.15.3.39.1.3.1.2.1 snmpget -v2c -c public <target> ZYXEL-L2PT-MIB::zyL2ptPointToPointProtocolGroup.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.15.3.39.1.3.1.2.1 s <value>
Start monitoring ZyXEL managed Ethernet switch (Layer 2 protocol-tunneling per-port/VLAN enable config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-L2PT-MIB::zyL2ptPointToPointProtocolGroup OID value, configure state conditions and alerts, and monitor any ZyXEL managed Ethernet switch (Layer 2 protocol-tunneling per-port/VLAN enable config status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | IES5206-MIB |
| 1.3.6.1.4.1.890.1 | products | IES5206-MIB |
| 1.3.6.1.4.1.890.1.15 | nwa1100nh | NWA1100-NH |
| 1.3.6.1.4.1.890.1.15.3 | esMgmt | NWA1100-NH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.15.3.39 | zyxelL2pt | ZYXEL-L2PT-MIB |
| 1.3.6.1.4.1.890.1.15.3.39.1 | zyxelL2ptSetup | ZYXEL-L2PT-MIB |
| 1.3.6.1.4.1.890.1.15.3.39.1.3 | zyxelL2ptTable | ZYXEL-L2PT-MIB |
| 1.3.6.1.4.1.890.1.15.3.39.1.3.1 | zyxelL2ptEntry | ZYXEL-L2PT-MIB |
| 1.3.6.1.4.1.890.1.15.3.39.1.3.1.2 | zyL2ptPointToPointProtocolGroup | ZYXEL-L2PT-MIB |