ZXR10-GARP-MIB :: zxr10GvrpGlobalStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-GARP-MIB › zxr10GvrpGlobalStatus

zxr10GvrpGlobalStatus

Module: ZXR10-GARP-MIB

OID (symbolic): ZXR10-GARP-MIB::zxr10GvrpGlobalStatus

OID (numeric): 1.3.6.1.4.1.3902.3.6000.507.3.1.1

Node type: OBJECT-TYPE

Type: GvrpEnabledStatus

Access: read-only

Description: The administrative status requested by management for GVRP. The value enabled(2) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(1), GVRP is disabled on all ports and all GVRP packets will be forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from disabled(1) to enabled(2) will cause a reset of all GVRP state machines on all ports.

What is zxr10GvrpGlobalStatus?

This value sets the administrative status of GVRP for the whole device: enabled(2) turns GVRP on for all ports not individually disabled, while disabled(1) turns GVRP off everywhere and causes GVRP packets to be forwarded transparently instead; toggling from disabled to enabled resets all GVRP state machines on every port. Admins use it as the master switch for dynamic VLAN registration protocol on the device. Setting it to disabled(1) would stop dynamic VLAN propagation via GVRP device-wide, with GVRP frames simply passing through unprocessed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.507.3.1.1
snmpwalk -v2c -c public <target> ZXR10-GARP-MIB::zxr10GvrpGlobalStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.507.3.1.1.1
snmpget -v2c -c public <target> ZXR10-GARP-MIB::zxr10GvrpGlobalStatus.1

Start monitoring ZTE Corporation ZXR10 router platforms, GARP/GVRP (VLAN-registration-mode/failed-registration-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-GARP-MIB::zxr10GvrpGlobalStatus OID value, configure state conditions and alerts, and monitor any ZTE Corporation ZXR10 router platforms, GARP/GVRP (VLAN-registration-mode/failed-registration-count status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.3zxr10FANS-POWER-MIB
1.3.6.1.4.1.3902.3.6000zxr10RosngMIBMR-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.6000.507zxr10GarpMIBZXR10-GARP-MIB
1.3.6.1.4.1.3902.3.6000.507.3zxr10GvrpGlobalObjectsZXR10-GARP-MIB
1.3.6.1.4.1.3902.3.6000.507.3.1zxr10GvrpConfigTableZXR10-GARP-MIB
1.3.6.1.4.1.3902.3.6000.507.3.1.1zxr10GvrpGlobalStatusZXR10-GARP-MIB