All MIBs › ZXR10-BGP-DYN-MIB › zxr10BPHoldTimeConfigured
zxr10BPHoldTimeConfigured
Module: ZXR10-BGP-DYN-MIB
OID (symbolic): ZXR10-BGP-DYN-MIB::zxr10BPHoldTimeConfigured
OID (numeric): 1.3.6.1.4.1.3902.3.6000.155.2.2.1.23
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Time interval (in seconds) for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (zxr10BPHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0). If it is zero (0), the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
What is zxr10BPHoldTimeConfigured?
This is the locally configured Hold Time in seconds sent to this peer in the OPEN message, must be zero or at least three seconds, with a suggested default of 90 seconds; a value of zero means Hold Time negotiation is disabled with this peer. Admins set this per-peer to control how quickly BGP declares a silent peer dead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.155.2.2.1.23 snmpwalk -v2c -c public <target> ZXR10-BGP-DYN-MIB::zxr10BPHoldTimeConfigured
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.6000.155.2.2.1.23.1 snmpget -v2c -c public <target> ZXR10-BGP-DYN-MIB::zxr10BPHoldTimeConfigured.1
Start monitoring ZTE ZXR10 carrier routers/switches (dynamic BGP route-table/attribute status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-BGP-DYN-MIB::zxr10BPHoldTimeConfigured OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 carrier routers/switches (dynamic BGP route-table/attribute status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.6000 | zxr10RosngMIB | MR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.155 | zxr10BgpDynMIB | ZXR10-BGP-DYN-MIB |
| 1.3.6.1.4.1.3902.3.6000.155.2 | zxr10BgpPeer | ZXR10-BGP-DYN-MIB |
| 1.3.6.1.4.1.3902.3.6000.155.2.2 | zxr10BgpPeerTable | ZXR10-BGP-DYN-MIB |
| 1.3.6.1.4.1.3902.3.6000.155.2.2.1 | zxr10BgpPeerEntry | ZXR10-BGP-DYN-MIB |
| 1.3.6.1.4.1.3902.3.6000.155.2.2.1.23 | zxr10BPHoldTimeConfigured | ZXR10-BGP-DYN-MIB |