All MIBs › WOLLONGONG-MIB › twgLBNeigh1
twgLBNeigh1
Module: WOLLONGONG-MIB
OID (symbolic): WOLLONGONG-MIB::twgLBNeigh1
OID (numeric): 1.3.6.1.4.1.6.2.1.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
What is twgLBNeigh1?
A read-only octet string giving the address of the neighboring device seen on the bridge's first ("1") LAN port, used to verify the bridge is connected to the expected peer on that side.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6.2.1.1.2 snmpwalk -v2c -c public <target> WOLLONGONG-MIB::twgLBNeigh1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6.2.1.1.2.1 snmpget -v2c -c public <target> WOLLONGONG-MIB::twgLBNeigh1.1
Start monitoring Wollongong Group TCP/IP stack host, legacy LAN bridge device (bridge uptime/frame-error/collision status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WOLLONGONG-MIB::twgLBNeigh1 OID value, configure state conditions and alerts, and monitor any Wollongong Group TCP/IP stack host, legacy LAN bridge device (bridge uptime/frame-error/collision status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6 | twg | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6.2 | proxy | WOLLONGONG-MIB |
| 1.3.6.1.4.1.6.2.1 | lANbridgeTab | WOLLONGONG-MIB |
| 1.3.6.1.4.1.6.2.1.1 | lANbridgeEnt | WOLLONGONG-MIB |
| 1.3.6.1.4.1.6.2.1.1.2 | twgLBNeigh1 | WOLLONGONG-MIB |