All MIBs › V2H124-24-MIB › xstInstanceCfgPathCostMethod
xstInstanceCfgPathCostMethod
Module: V2H124-24-MIB
OID (symbolic): V2H124-24-MIB::xstInstanceCfgPathCostMethod
OID (numeric): 1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: For RST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch.
When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed.
When the value of this MIB object is set to long(2), the xstInstancePortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32 bit value. The set operation on dot1dStpPortPathCost in the BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of xstInstancePortPathCost for the same instance exceeds 65535.
When the value of this MIB object is set to short(1), the dot1dStpPortPathCost in the BRIDGE-MIB must be used.
What is xstInstanceCfgPathCostMethod?
Reports whether this Rapid Spanning Tree instance is currently using the short(1), 16-bit, or long(2), 32-bit, port-cost scale; when long(2) is in effect, xstInstancePortPathCost must be used to read or set a port's real cost, since the standard BRIDGE-MIB path-cost object caps out at 65535 and rejects sets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.16 snmpwalk -v2c -c public <target> V2H124-24-MIB::xstInstanceCfgPathCostMethod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.16.1 snmpget -v2c -c public <target> V2H124-24-MIB::xstInstanceCfgPathCostMethod.1
Start monitoring Enterasys V2H124-24 stackable switches (per-unit firmware version/stack-role status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the V2H124-24-MIB::xstInstanceCfgPathCostMethod OID value, configure state conditions and alerts, and monitor any Enterasys V2H124-24 stackable switches (per-unit firmware version/stack-role status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.12 | ctronV2H | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.12.30 | v2h124_24MIB | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.12.30.1 | v2h124_24MIBObjects | V2H124-24-MIB |
| 1.3.6.1.4.1.52.4.12.30.1.5 | staMgt | V2H124-24-MIB |
| 1.3.6.1.4.1.52.4.12.30.1.5.6 | xstMgt | V2H124-24-MIB |
| 1.3.6.1.4.1.52.4.12.30.1.5.6.4 | xstInstanceCfgTable | V2H124-24-MIB |
| 1.3.6.1.4.1.52.4.12.30.1.5.6.4.1 | xstInstanceCfgEntry | V2H124-24-MIB |
| 1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.16 | xstInstanceCfgPathCostMethod | V2H124-24-MIB |