All MIBs › TPLINK-USERSECURITY-MIB › userSecurityUserAuthIpEnable
userSecurityUserAuthIpEnable
Module: TPLINK-USERSECURITY-MIB
OID (symbolic): TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpEnable
OID (numeric): 1.3.6.1.4.1.11863.6.41.1.1.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0. disable 1.enable
What is userSecurityUserAuthIpEnable?
Turns IP-based management access control on or off; when enabled, management traffic is only accepted from source IPs matching a configured auth-IP/mask entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.41.1.1.3.1 snmpwalk -v2c -c public <target> TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.41.1.1.3.1.1 snmpget -v2c -c public <target> TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.41.1.1.3.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> userSecurityUserAuthIpEnable.1
Start monitoring TP-LINK managed switches (per-port/IP/MAC service-access-control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpEnable OID value, configure state conditions and alerts, and monitor any TP-LINK managed switches (per-port/IP/MAC service-access-control status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.41 | tplinkUserSecurity | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1 | tplinkUserSecurityMIBObjects | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1 | userSecurityUserAuth | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3 | userSecurityUserAuthIp | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3.1 | userSecurityUserAuthIpEnable | TPLINK-USERSECURITY-MIB |