All MIBs › TPLINK-USERSECURITY-MIB › userSecurityUserAuthIpAccessSsh
userSecurityUserAuthIpAccessSsh
Module: TPLINK-USERSECURITY-MIB
OID (symbolic): TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessSsh
OID (numeric): 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0. disable -- SSH frame sent to the switch will be accepted by default 1.enable -- SSH frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
What is userSecurityUserAuthIpAccessSsh?
Restricts SSH access to source addresses in the same network segment as this auth IP entry when enabled; when disabled, SSH is accepted from any address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.4 snmpwalk -v2c -c public <target> TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessSsh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.4.1 snmpget -v2c -c public <target> TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessSsh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.4.1 i <value>
Start monitoring TP-LINK managed switches (per-port/IP/MAC service-access-control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessSsh OID value, configure state conditions and alerts, and monitor any TP-LINK managed switches (per-port/IP/MAC service-access-control status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.41 | tplinkUserSecurity | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1 | tplinkUserSecurityMIBObjects | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1 | userSecurityUserAuth | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3 | userSecurityUserAuthIp | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3.2 | userSecurityUserAuthIpTable | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3.2.1 | userSecurityUserAuthIpEntry | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.4 | userSecurityUserAuthIpAccessSsh | TPLINK-USERSECURITY-MIB |