All MIBs › TPLINK-USERSECURITY-MIB › userSecurityUserAuthIpAccessHttp
userSecurityUserAuthIpAccessHttp
Module: TPLINK-USERSECURITY-MIB
OID (symbolic): TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessHttp
OID (numeric): 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0. disable -- HTTP frame sent to the switch will be accepted by default 1.enable -- HTTP frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
What is userSecurityUserAuthIpAccessHttp?
Restricts HTTP access to source addresses in the same network segment as this auth IP entry when enabled; when disabled, HTTP is accepted from any address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.5 snmpwalk -v2c -c public <target> TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessHttp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.5.1 snmpget -v2c -c public <target> TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessHttp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.5.1 i <value>
Start monitoring TP-LINK managed switches (per-port/IP/MAC service-access-control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpAccessHttp OID value, configure state conditions and alerts, and monitor any TP-LINK managed switches (per-port/IP/MAC service-access-control status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.41 | tplinkUserSecurity | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1 | tplinkUserSecurityMIBObjects | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1 | userSecurityUserAuth | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3 | userSecurityUserAuthIp | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3.2 | userSecurityUserAuthIpTable | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3.2.1 | userSecurityUserAuthIpEntry | TPLINK-USERSECURITY-MIB |
| 1.3.6.1.4.1.11863.6.41.1.1.3.2.1.5 | userSecurityUserAuthIpAccessHttp | TPLINK-USERSECURITY-MIB |