All MIBs › TPLINK-GVRP-MIB › tpGvrpLeaveAllTimer
tpGvrpLeaveAllTimer
Module: TPLINK-GVRP-MIB
OID (symbolic): TPLINK-GVRP-MIB::tpGvrpLeaveAllTimer
OID (numeric): 1.3.6.1.4.1.11863.6.20.1.2.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Once the LeaveAll Timer is set, the port with GVRP enabled can send a LeaveAll message after the timer times out, so that other GARP ports can re-register all the attribute information. After that, the LeaveAll timer will start to begin a new cycle. The LeaveAll Timer ranges from 1000 to 30000 centiseconds and could be devided exactly by 5.
What is tpGvrpLeaveAllTimer?
This read-write object sets, in centiseconds (1000-30000, divisible by 5), the LeaveAll Timer, after which a GVRP-enabled port sends a LeaveAll message prompting other GARP ports to re-register all VLAN attribute information, then restarts the cycle. An admin tunes this to control how often the switch forces a full VLAN re-registration cycle across GVRP ports, balancing protocol overhead against how quickly stale registrations are cleared. Setting it to 10000 centiseconds (100 seconds) means the port will trigger a full re-registration cycle roughly every 100 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.20.1.2.1.1.4 snmpwalk -v2c -c public <target> TPLINK-GVRP-MIB::tpGvrpLeaveAllTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.20.1.2.1.1.4.1 snmpget -v2c -c public <target> TPLINK-GVRP-MIB::tpGvrpLeaveAllTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.20.1.2.1.1.4.1 i <value>
Start monitoring TP-Link managed switch (GVRP dynamic VLAN registration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-GVRP-MIB::tpGvrpLeaveAllTimer OID value, configure state conditions and alerts, and monitor any TP-Link managed switch (GVRP dynamic VLAN registration status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.20 | tplinkGvrpMIB | TPLINK-GVRP-MIB |
| 1.3.6.1.4.1.11863.6.20.1 | tplinkGvrpMIBObjects | TPLINK-GVRP-MIB |
| 1.3.6.1.4.1.11863.6.20.1.2 | tpGvrpPortConfig | TPLINK-GVRP-MIB |
| 1.3.6.1.4.1.11863.6.20.1.2.1 | tpGvrpPortTable | TPLINK-GVRP-MIB |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1 | tpGvrpPortEntry | TPLINK-GVRP-MIB |
| 1.3.6.1.4.1.11863.6.20.1.2.1.1.4 | tpGvrpLeaveAllTimer | TPLINK-GVRP-MIB |