All MIBs › TPLINK-BANDWIDTH-MIB › tpStormControlMultiCastRateMode
tpStormControlMultiCastRateMode
Module: TPLINK-BANDWIDTH-MIB
OID (symbolic): TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRateMode
OID (numeric): 1.3.6.1.4.1.11863.6.23.1.2.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Multicast rate mode configuration. Configure kbps & ratio with the 'tpStormControlEnablePPS' setting to disable. Configure pps with the 'tpStormControlEnablePPS' setting to enable.
What is tpStormControlMultiCastRateMode?
This read-write value selects the unit used for the port's multicast storm-control threshold: kbps(0), ratio(1) as a percentage of bandwidth, or pps(2) packets per second, mirroring the broadcast rate mode setting. It must be coordinated with tpStormControlEnablePPS, since kbps and ratio(1) require PPS mode disabled while pps(2) requires it enabled. For example, an admin troubleshooting excessive multicast flooding might set this to kbps(0) to cap multicast traffic at a fixed rate like 500 kbps via tpStormControlMultiCastRate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.2.1.3 snmpwalk -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRateMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.2.1.3.1 snmpget -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRateMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.23.1.2.2.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> tpStormControlMultiCastRateMode.1
Start monitoring TP-Link managed switch (per-port ingress/egress rate-limit config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRateMode OID value, configure state conditions and alerts, and monitor any TP-Link managed switch (per-port ingress/egress rate-limit config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.23 | tplinkBandWidthMIB | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1 | tplinkBandWidthMIBObjects | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2 | tpStormControl | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.2 | tpStormControlModeTable | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.2.1 | tpStormControlModeEntry | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.2.1.3 | tpStormControlMultiCastRateMode | TPLINK-BANDWIDTH-MIB |