TPLINK-BANDWIDTH-MIB :: tpStormControlMultiCastRate

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TPLINK-BANDWIDTH-MIB › tpStormControlMultiCastRate

tpStormControlMultiCastRate

Module: TPLINK-BANDWIDTH-MIB

OID (symbolic): TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRate

OID (numeric): 1.3.6.1.4.1.11863.6.23.1.2.3.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Set the bandwidth for receiving multicast packets on the port. The packet traffic exceeding the bandwidth will be discarded. kbps(0-1000000) ratio(0-100) pps(0-1488000) Set it 0 to disable the storm control function for the port.

What is tpStormControlMultiCastRate?

This read-write value sets the multicast storm-control threshold for the port, interpreted as kbps, a percentage ratio, or pps depending on tpStormControlMultiCastRateMode, with excess multicast traffic beyond this threshold discarded. Setting it to 0 disables multicast storm control on that port. For example, in pps mode a value of 5000 would drop multicast packets once the port exceeds 5,000 per second.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.3.1.3
snmpwalk -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.3.1.3.1
snmpget -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.23.1.2.3.1.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> tpStormControlMultiCastRate.1

Start monitoring TP-Link managed switch (per-port ingress/egress rate-limit config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-BANDWIDTH-MIB::tpStormControlMultiCastRate OID value, configure state conditions and alerts, and monitor any TP-Link managed switch (per-port ingress/egress rate-limit config status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11863tplinkTPLINK-MIB
1.3.6.1.4.1.11863.6tplinkMgmtTPLINK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11863.6.23tplinkBandWidthMIBTPLINK-BANDWIDTH-MIB
1.3.6.1.4.1.11863.6.23.1tplinkBandWidthMIBObjectsTPLINK-BANDWIDTH-MIB
1.3.6.1.4.1.11863.6.23.1.2tpStormControlTPLINK-BANDWIDTH-MIB
1.3.6.1.4.1.11863.6.23.1.2.3tpStormControlTableTPLINK-BANDWIDTH-MIB
1.3.6.1.4.1.11863.6.23.1.2.3.1tpStormControlEntryTPLINK-BANDWIDTH-MIB
1.3.6.1.4.1.11863.6.23.1.2.3.1.3tpStormControlMultiCastRateTPLINK-BANDWIDTH-MIB