All MIBs › TPLINK-BANDWIDTH-MIB › tpStormControlEnablePPS
tpStormControlEnablePPS
Module: TPLINK-BANDWIDTH-MIB
OID (symbolic): TPLINK-BANDWIDTH-MIB::tpStormControlEnablePPS
OID (numeric): 1.3.6.1.4.1.11863.6.23.1.2.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The storm control rate mode configuration: Disable: kbps & ratio mode is avalible with this status. Enable: enable PPS mode, only pps mode is avalible.
What is tpStormControlEnablePPS?
This read-write switch selects whether this port's storm control operates in packets-per-second mode: enable(1) turns PPS mode on (making only pps rate mode available), while disable(0) leaves kbps and ratio rate modes available instead. An admin must set this before configuring the actual storm-control rate mode and thresholds in the related tables, since it determines which units those settings will use. For example, setting this to enable(1) is required before configuring tpStormControlBroadCastRateMode as pps(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.1.1.2 snmpwalk -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlEnablePPS
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.1.1.2.1 snmpget -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlEnablePPS.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.23.1.2.1.1.2.1 i <value>
Start monitoring TP-Link managed switch (per-port ingress/egress rate-limit config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-BANDWIDTH-MIB::tpStormControlEnablePPS OID value, configure state conditions and alerts, and monitor any TP-Link managed switch (per-port ingress/egress rate-limit config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.23 | tplinkBandWidthMIB | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1 | tplinkBandWidthMIBObjects | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2 | tpStormControl | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.1 | tpStormControlEnPPSTable | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1 | tpStormControlEnPPSEntry | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.1.1.2 | tpStormControlEnablePPS | TPLINK-BANDWIDTH-MIB |