All MIBs › TPLINK-BANDWIDTH-MIB › tpStormControlBroadCastRateMode
tpStormControlBroadCastRateMode
Module: TPLINK-BANDWIDTH-MIB
OID (symbolic): TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRateMode
OID (numeric): 1.3.6.1.4.1.11863.6.23.1.2.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Broadcast rate mode configuration. Configure kbps & ratio with the 'tpStormControlEnablePPS' setting to disable. Configure pps with the 'tpStormControlEnablePPS' setting to enable.
What is tpStormControlBroadCastRateMode?
This read-write value selects the unit used for the port's broadcast storm-control threshold: kbps(0), ratio(1) as a percentage of link bandwidth, or pps(2) packets per second. The kbps and ratio(1) options only take effect when tpStormControlEnablePPS is disabled on that port, while pps(2) requires it to be enabled, so an admin must coordinate the two settings. For example, setting this to ratio(1) lets the admin cap broadcast traffic as a percentage of the port's total bandwidth rather than an absolute rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.2.1.2 snmpwalk -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRateMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.2.1.2.1 snmpget -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRateMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.23.1.2.2.1.2.1 i <value>
Start monitoring TP-Link managed switch (per-port ingress/egress rate-limit config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRateMode OID value, configure state conditions and alerts, and monitor any TP-Link managed switch (per-port ingress/egress rate-limit config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.23 | tplinkBandWidthMIB | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1 | tplinkBandWidthMIBObjects | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2 | tpStormControl | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.2 | tpStormControlModeTable | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.2.1 | tpStormControlModeEntry | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.2.1.2 | tpStormControlBroadCastRateMode | TPLINK-BANDWIDTH-MIB |