All MIBs › TPLINK-BANDWIDTH-MIB › tpStormControlBroadCastRate
tpStormControlBroadCastRate
Module: TPLINK-BANDWIDTH-MIB
OID (symbolic): TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRate
OID (numeric): 1.3.6.1.4.1.11863.6.23.1.2.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Set the bandwidth for receiving broadcast packets on the port. The packet traffic exceeding the bandwidth will be discarded. kbps(0-1000000) ratio(0-100) pps(0-1488000) Set it 0 to disable the storm control function for the port.
What is tpStormControlBroadCastRate?
This read-write value sets the broadcast storm-control threshold for the port, interpreted as kbps (0-1,000,000), a ratio percentage (0-100), or pps (0-1,488,000) depending on the mode chosen in tpStormControlBroadCastRateMode; any broadcast traffic exceeding this threshold is discarded. Setting this to 0 disables broadcast storm control entirely on the port. For example, in ratio mode a value of 20 would cap broadcast traffic at 20% of the port's bandwidth, discarding the excess.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.3.1.2 snmpwalk -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11863.6.23.1.2.3.1.2.1 snmpget -v2c -c public <target> TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11863.6.23.1.2.3.1.2.1 i <value>
Start monitoring TP-Link managed switch (per-port ingress/egress rate-limit config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPLINK-BANDWIDTH-MIB::tpStormControlBroadCastRate OID value, configure state conditions and alerts, and monitor any TP-Link managed switch (per-port ingress/egress rate-limit config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11863 | tplink | TPLINK-MIB |
| 1.3.6.1.4.1.11863.6 | tplinkMgmt | TPLINK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11863.6.23 | tplinkBandWidthMIB | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1 | tplinkBandWidthMIBObjects | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2 | tpStormControl | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.3 | tpStormControlTable | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.3.1 | tpStormControlEntry | TPLINK-BANDWIDTH-MIB |
| 1.3.6.1.4.1.11863.6.23.1.2.3.1.2 | tpStormControlBroadCastRate | TPLINK-BANDWIDTH-MIB |