All MIBs › TPDIN2-MIB › voltage4
voltage4
Module: TPDIN2-MIB
OID (symbolic): TPDIN2-MIB::voltage4
OID (numeric): 1.3.6.1.4.1.45621.2.2.8
Node type: OBJECT-TYPE
Type: Tenths
Access: read-only
Description: Voltage 4
What is voltage4?
This read-only value reports the fourth monitored voltage reading from the TPDIN unit, encoded per the Tenths textual convention (an integer 0-10000 with a "d-1" display hint, meaning the raw value is divided by 10 to yield one decimal digit). Admins poll this to track a fourth monitored power rail for out-of-range alerting across a multi-channel installation. A raw value of 120 would display as 12.0 volts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45621.2.2.8 snmpwalk -v2c -c public <target> TPDIN2-MIB::voltage4
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45621.2.2.8.1 snmpget -v2c -c public <target> TPDIN2-MIB::voltage4.1
Start monitoring Tycon Systems TPDIN2 DIN-rail PoE switch (voltage/relay-output status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPDIN2-MIB::voltage4 OID value, configure state conditions and alerts, and monitor any Tycon Systems TPDIN2 DIN-rail PoE switch (voltage/relay-output status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45621 | tycon | TPDIN2-MIB |
| 1.3.6.1.4.1.45621.2 | tpdin2 | TPDIN2-MIB |
| 1.3.6.1.4.1.45621.2.2 | monitor | TPDIN2-MIB |
| 1.3.6.1.4.1.45621.2.2.8 | voltage4 | TPDIN2-MIB |