All MIBs › TPDIN2-MIB › temperature2
temperature2
Module: TPDIN2-MIB
OID (symbolic): TPDIN2-MIB::temperature2
OID (numeric): 1.3.6.1.4.1.45621.2.2.14
Node type: OBJECT-TYPE
Type: Tenths
Access: read-only
Description: Internal Temp
What is temperature2?
This read-only value reports the internal temperature reading from the TPDIN unit, per the source description "Internal Temp," encoded per the Tenths textual convention (an integer 0-10000 with a "d-1" display hint, meaning the raw value is divided by 10 to yield one decimal digit). Admins poll this to monitor the temperature inside the device enclosure and catch internal overheating before it damages equipment. A raw value of 280 would display as 28.0 degrees.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45621.2.2.14 snmpwalk -v2c -c public <target> TPDIN2-MIB::temperature2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45621.2.2.14.1 snmpget -v2c -c public <target> TPDIN2-MIB::temperature2.1
Start monitoring Tycon Systems TPDIN2 DIN-rail PoE switch (voltage/relay-output status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TPDIN2-MIB::temperature2 OID value, configure state conditions and alerts, and monitor any Tycon Systems TPDIN2 DIN-rail PoE switch (voltage/relay-output status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45621 | tycon | TPDIN2-MIB |
| 1.3.6.1.4.1.45621.2 | tpdin2 | TPDIN2-MIB |
| 1.3.6.1.4.1.45621.2.2 | monitor | TPDIN2-MIB |
| 1.3.6.1.4.1.45621.2.2.14 | temperature2 | TPDIN2-MIB |