All MIBs › SWITCH-VLAN-MIB › vRouterProtocol
vRouterProtocol
Module: SWITCH-VLAN-MIB
OID (symbolic): SWITCH-VLAN-MIB::vRouterProtocol
OID (numeric): 1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: This object is used to enable/disable routing protocols. The value of this object is the logical ORing of each bit identifying the routing protocol below, where bit 0 is the low order bit, i.e. 2**0. ipRip bit 0 ipEgp bit 1 ipGgp bit 2 ipHello bit 3 ipIs-is bit 4 ipEs-is bit 5 ipCiscoIgrp bit 6 ipBbnSpfIgp bit 7 ipOspf bit 8 Setting the appropriate bit enables the protocol (if supported); clearing the bit, disables the protocol.
What is vRouterProtocol?
A bitmask enabling or disabling routing protocols on this virtual router instance, where each bit position (RIP=bit 0, EGP=bit 1, and so on) toggles one protocol, letting an admin turn on exactly the protocols this router should run.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.9 | at8200SwitchMib | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2 | switchMibModules | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.2.5 | vLanModule | TELESYN-ATI-TC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.9.2.5.2 | switchVlanMib | SWITCH-VLAN-MIB |
| 1.3.6.1.4.1.207.8.9.2.5.2.2 | vRouterGroup | SWITCH-VLAN-MIB |
| 1.3.6.1.4.1.207.8.9.2.5.2.2.1 | vRouterTable | SWITCH-VLAN-MIB |
| 1.3.6.1.4.1.207.8.9.2.5.2.2.1.1 | vRouterEntry | SWITCH-VLAN-MIB |
| 1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.1 | vRouterProtocol | SWITCH-VLAN-MIB |