All MIBs › SWITCH-CHASSIS-MIB › tftpOperation
tftpOperation
Module: SWITCH-CHASSIS-MIB
OID (symbolic): SWITCH-CHASSIS-MIB::tftpOperation
OID (numeric): 1.3.6.1.4.1.207.8.9.1.1.9.4.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When tftpOperation has the value putFile(1) when tftpAdminStatus is set to 'execute', the device attempts to copy the file identified by tftpLocalFileName to the file tfptRemoteFileName.
When tftpOperation has the value getFile(2) when tftpAdminStatus is set to 'execute', the device attempts to copy the file identified by tftpRemoteFileName on the remote tftp server to the file identified by tftpLocalFileName.
When tftpOperation has the value getFirmware(3) when tftpAdminStatus is set to 'execute', the device attempts to replace its firmware image with the file identified by tftpRemoteFileName. This firmware file will be used the next time the system is reset. When tftpOperation has the value putConfig(1) when tftpAdminStatus is set to 'execute', the device attempts to copy the file identified by tftpLocalFileName to the file tfptRemoteFileName.
When tftpOperation has the value getConfig(2) when tftpAdminStatus is set to 'execute', the device attempts to copy the file identified by tftpRemoteFileName on the remote tftp server to the file identified by tftpLocalFileName.
What is tftpOperation?
Selects which TFTP action to perform once tftpAdminState is set to 'execute': putFile uploads tftpLocalFileName to the server, getFile downloads tftpRemoteFileName, and getFirmware downloads a new firmware image to be used on the next reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.9.1.1.9.4.5 snmpwalk -v2c -c public <target> SWITCH-CHASSIS-MIB::tftpOperation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.9.1.1.9.4.5.1 snmpget -v2c -c public <target> SWITCH-CHASSIS-MIB::tftpOperation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.9.1.1.9.4.5.1 i <value>
Start monitoring modular/chassis-based Ethernet switch (hardware inventory/fan/firmware status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-CHASSIS-MIB::tftpOperation OID value, configure state conditions and alerts, and monitor any modular/chassis-based Ethernet switch (hardware inventory/fan/firmware status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.9 | at8200SwitchMib | TELESYN-ATI-TC |
| 1.3.6.1.4.1.207.8.9.1 | switchChassis | TELESYN-ATI-TC |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.9.1.1 | switchChassisMib | SWITCH-CHASSIS-MIB |
| 1.3.6.1.4.1.207.8.9.1.1.9 | bootParams | SWITCH-CHASSIS-MIB |
| 1.3.6.1.4.1.207.8.9.1.1.9.4 | tftpGroup | SWITCH-CHASSIS-MIB |
| 1.3.6.1.4.1.207.8.9.1.1.9.4.5 | tftpOperation | SWITCH-CHASSIS-MIB |